|  |  | 
| CS-1:   The original companionway screen designed by Glebe Creek.  Built to your boat's exact dimensions, this screen slips right into the companionway track. It is exceptionally handsome, functional, and economical. Crafted of solid teak, this screen can be ordered either in a hinged version or in two separate sections. Frame sections open for easy screen replacement. Available with solid brass or stainless steel hardware. $229.00 to $249.00 depending on size and shape. 
Return to Companionway Screens |  
 | 
|  |  | 
| CS-2: Providing quick and easy passage through 
the companionway, the model CS-2 screen door set is designed to mount directly to the 
fascia or trim on the exterior of the companionway. Lift-off hinges make setup and removal
a snap. Screen doors do not occupy the companionway track allowing control of airflow with
the dropboards on most boats. Solid teak doorframes open for screen replacement. Available
with stainless steel hardware only. $299.00 to $329.00 depending on size and
shape. 
Return to Companionway Screens |  | 
|  |  | 
CS-3: Combines the 
easy access of screen doors with the simplicity of  "drop-in" screens. No installation is 
required and no hardware remains on your boat. A "take-apart" hinge at the bottom center 
of the frame provides for easy breakdown and storage. Construction is solid teak throughout.
Hinges and hardware available in solid brass or stainless steel. $419.00 -$449.00 depending 
on size and shape. Return to Companionway Screens  |   | 
|  |  | 
| HCS-1:  Used with 
any of our vertical screens, the horizontal or top companionway screen affords the 
maximum ventilation possible. Depending on how the companionway is built, this screen 
is designed to rest on the slide track or on the wood or fiberglass trim on the 
companionway wall. These screens also feature our hinged, folding design,
beautiful teak frame, choice of brass or stainless hardware, and replaceable
screen. $199.00 to $239.00 depending on size and modifications necessary.  
Return to Companionway Screens  |   | 
|  |  | 
| HS-1:  Our most versatile
and popular hatch screen, HS-1 single-frame screens work equally well with molded fiberglass 
hatch openings or wood-trimmed openings.  Attached to the cabin ceiling with take-apart hinges 
and held in place by teak turn blocks, this design allows quick, hands-free access to the hatch.
Screens are sized and shaped as needed to match each opening.  Choice of solid brass
or chrome/stainless steel hardware.  $79.00- $149.00
 Return to Cabin Hatch Screens
 |   | 
|  |  | 
HS-2:   
Designed for 
untrimmed hatch openings, this fully assembled unit provides handsome teak trim for the hatch 
opening as well as a perfectly matched screen.  Trim ring is pre-drilled and countersunk for 
easy installation.  The screen is attached to the trim with take-apart hinges for quick access 
or removal, and held with teak turn blocks.   Screen set is sized and shaped to match each hatch.
Available in brass or chrome/stainless steel. $149- $249.00
 
Return to Cabin Hatch Screens |   | 
|  |  | 
HS-3:   Also designed
for untrimmed hatches, this "slide-in" style screen provides both a teak trim for the opening 
and a fitted screen.  The screen simply slides out of the frame for easy access to the hatch.
A knurled thumb screw on the screen frame secures the screen to the trim frame.
Most appropriate for flat, unobstructed hatch openings and cabin ceilings. 
Trim frame is pre-drilled and countersunk for ready installation.  $129.00 - $229.00
 
Return to Cabin Hatch Screens  |   | 
|  |  | 
| 
HS-4:      Specifically
designed to fit any Lewmar or Bomar Hatches installed with their screen trim kit, these screens 
replace the aluminum screens provided for these hatches.  Our HS-4 screens are attached to the 
trim with take-apart hinges allowing hands-free access to the hatch and complete removal.  Teak
turn blocks hold the screen in place.  Hardware available in stainless steel only. 
$82.00 and $149.00 
Return to Cabin Hatch Screens  |   | 
|  |  |